Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13560415
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Imported PEK board. Temperature PEK rod high strength PEK tube |
Published: | 2014-10-21 |
Validity: | 365 |
Specifications: | Various specifications |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | "PEEK tube plate .PEEK .PEEK rod when the temperature reaches the material having excellent dielectric properties prior to 260 degrees. Resistance to energy ray irradiation, and it belongs to high temperature thermoplastic with a high glass transition temperature (143 ℃) and melting point (334 ℃), load thermal deformation temperature up to 316 ℃ (30% glass fiber or carbon fiber-reinforced grades), long-term use at 250 ℃, and other high temperature plastics such as PI, PPS, PTFE, PPO and other phase ratio, the upper limit use temperature was nearly 50 ℃; PEEK rod excellent in heat than other high-temperature plastic, and have a high strength, high modulus, high fracture toughness and good dimensional stability; PEEK rods at high temperature can maintain high strength, bending strength which is up to about 200 ℃, 24MPa, 250 ℃ bending strength and compressive strength is still 12 ~ 13MPa; preferably greater rigidity, dimensional stability of the PEEK resin, the coefficient of linear expansion small, very close to the aluminum metal material; has excellent chemical resistance, in the conventional chemicals, only the concentrated sulfuric acid to dissolve or break it, and it is similar to the corrosion resistance of steel and nickel, and its flame retardant resistance, release under fire conditions less smoke and toxic gases, anti-radiation and strong; PEEK rods good toughness, good for alternating stress fatigue resistance is the most outstanding of all plastics, can be comparable with alloy materials; PEEK rods material with outstanding tribological properties, resistance to sliding wear and fretting excellent wear properties, especially to maintain high wear resistance and low friction coefficient at 250 ℃; PEEK has excellent overall performance, good mechanical properties, high temperature , superior chemical resistance, making it the most common high-grade plastic. " |
Admin>>>
You are the 9807 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan Cheng Lixin Plastic Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9807 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan Cheng Lixin Plastic Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility